|
|
|
|
Joined: Apr 2007
Posts: 421
Member
|
|
Member
Joined: Apr 2007
Posts: 421 |
I have installed 2 Norstar Gateways that interact with a MICS and CICS. These are also networked with a BCM50 Rls1. I can call back and forth from the BCM50 to the MICS through the gateway. I can call from the BCM50 to the CICS but I cannot call from the CICS to the BCM50. I programmed one of their existing POTS lines as Auto Answer, Supervised and no to answer with DISA. I called in and it rang 3 times but did not give me dial tone. I ran the same test here in my shop with a test CICS and I received dial tone from the system. Is this a hardware issue with the CICS or a software issue? The CICS is 4.2.
:bang:
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2007
Posts: 421
Member
|
|
Member
Joined: Apr 2007
Posts: 421 |
I tested on site with another CICS. Will be going back to replace CICS.
|
|
|
|
Forums84
Topics94,562
Posts640,149
Members49,863
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Toner),
82
guests, and
76
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
