|
|
|
|
Joined: Mar 2007
Posts: 34
Member
|
|
Member
Joined: Mar 2007
Posts: 34 |
I have a customer with a rls 18 Option 11. they decided to change vendors to a company who does not support Ground Start. I converted to Loop start and now the lines don't properly disconnect when the CO drops the call.
Is there something I need to turn on or off to have the PBX drop the call?
Go slow with me, I'm certified, but get lost in the programming... ha ha
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
That is the problem with loop starts on PBXs. To speed things up go to the RDB for the group of lines and chg NEDC and FEDC to ETH.
|
|
|
|
|
Joined: Mar 2007
Posts: 34
Member
|
|
Member
Joined: Mar 2007
Posts: 34 |
I did that it is not helping.
|
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
I have never had much luck with loop line supervision on older Options. By rls 25 it worked well, but I do not think you are going to get it done on rls 18.
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
There is a Loop to Ground converter you could put between the lines and the PBX. I've used them in the past with good results.
|
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
Yes, No, Maybe.. Never used one. If you go ahead and do it, let us know the results.
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
285
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
