|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
|
Member
Joined: Mar 2008
Posts: 89 |
e & m not an option on the USA version maybe there
in euro zone but who knows about Malaysia.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 126
Member
|
|
Member
Joined: Jun 2006
Posts: 126 |
Dang! MrG!
Its so obvious! Thanks for helping me see through this. I was so caught up in trying to learn the TDAMS software that I did not realise the solution was in front of my eyes! :toast:
If I still persist in using DISA, then I am doomed as the customer would not buy any more cards like the OGM and stuff.
I'll see what I can do this Fri/Sat as now my schedule has changed and I am on a last minute 600km-odd trip to the South for a service call.
I re-edited also to say, 80% of them are using SLT phones, so I will have to reprogram a more friendlier line access codes for them and not the [*37xxx] sequence.
|
|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
|
Member
Joined: Mar 2008
Posts: 89 |
it would be 808ext#=trunk group number on other
system plus 3 or 4 digit ext number .Where did you
get *37 from? you could put key players on other
system in system speed dial and get a dial
code down to 4 digits .
|
|
|
|
|
Joined: Jun 2006
Posts: 126
Member
|
|
Member
Joined: Jun 2006
Posts: 126 |
Jojon,
Over here, [*37XXXX} is the code for the System's Numbering Plan for Single CO Line Access. Maybe its because of where I am based, the codes might have changed to suit this country.
Thanks a lot guys. I am going to see them on Friday or Saturday.
|
|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
|
Member
Joined: Mar 2008
Posts: 89 |
Its the same here but if you have a group of 4 ext's why not put the 4 ext in a trunk group and
you'd actually be able to dial by name off display
phones with system speed dial..
|
|
|
|
|
Joined: Jun 2006
Posts: 126
Member
|
|
Member
Joined: Jun 2006
Posts: 126 |
Jojon, I am not sure on how to do a trunk group though, and everyone's using SLT phones. The software is going to take me some time to get used to it. Not only that, the Panasonic guys are not answering my calls much nowadays  MrEngineer, please send your link via PM or email. Thank you, MrG
|
|
|
|
|
Joined: Jun 2006
Posts: 126
Member
|
|
Member
Joined: Jun 2006
Posts: 126 |
Sorry about that.
Anyway, now I understood what Jojon meant by Trunk Groups. Should have seen that earlier and then the customer does not have to test their luck with the single CO line access code.
|
|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
|
Member
Joined: Mar 2008
Posts: 89 |
.... speed dials 
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
2 to 4 slt on each system connected to CO on other system, these COs in a Pool key or dial up group,
I believe as Mr G said.
|
|
|
|
|
Joined: Mar 2008
Posts: 89
Member
|
|
Member
Joined: Mar 2008
Posts: 89 |
|
|
|
|
Forums84
Topics94,515
Posts639,966
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
230
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
