atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems Looking for programming Software for Telrad 8/18

Yikes! Now that did go over my head....

Is that a module on the same card as the modem?

Geoff

No, we use the old 1A2 power supplies or you can get the little unit, I think Sundance may have them, don't need them anymore as the new SL cards are built in.

Uuuuhhhh..... ??????

What kind of voltage do I need (90 AC?) And where would this hook up? Is this in the online manual?

Geoff

This is something you SHOULDN'T try and make as you will most certianly blow the card and or system, I would call Sundance if I were you.

I wouldn't even know what to ask for if I called.... could you get a part # or price for me?

Geoff

I checked and they are out of them, I don't have any more of them either. Perhaps SS or someone else will chime in that does have one.

Okay, I got the cabinet today-

The memory cart had a sticker that said SBM 3.05 C

I ordered the SBM3 8/18 kit

Now -

Can anyone tell me where to find a manual that will tell me where to connect the digital phones to the ELD card?!! PLEASE!

Also the SHO card only has what looks like half or 4 of the ports saudered (instead of 8)

AND it has a ringing generator square on it.

(it also has a bright orange sticker that says WARNING on it) - thought I might stay away from that one.

I ordered a few of the centronics to 66 block adaptors They will be in 8/10/05

I would just like to test one of the black exec phones to make sure it works... the ELD card's led light is staying on and after paying $35 for access to a manuals website it appears that none (or almost none) of the manuals are for this box...

I will gladly pay for the manuals that tell me how to:

- Connect 3 analog phone lines to the system
- Connect the 3 Executive and 5 regular display phones to the unit
- connect the Fax machine and 2 cordless phones to the box
- 1 or 2 ports for a voice mail server (which will be in later this week)

I have the info ya'll gave me eariler but I need to know if the digital phones are 2 wire or 4 wire - which is pin 1 when upright - and G R Y B = 1 2 3 4 (pins) on eld?

Way too much information I guess but anyone that can help would be very appreciated!

Thanks

Geoff

I don't know what manual site you joined but the one that is partners with this site does have them. I thought you had the mauals and was studying them as you said in one of your ealier posts.

[This message has been edited by dtmf (edited August 09, 2005).]

You fellows were up late last night. Geoff you received a SHD card (4 port analog with ring gen as you stated). DTMF said a SLD was a 16 port but he was thinking ONS. I also replied to your email this morning. We can get this setup and going no problem. Do you have the 66 blocks or are you terminating on a patch panel? What about the 25 pair tails?

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
How about some Camo? DUCKCAMO.com

Sorry, yes I meant a ONS. I've been doing them to long and have my own terminology