sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Programming Software

I found it dtmf.

Thanks for your help!

at the risk of paraphrasing
if you have the correct dongle
and noone has been using the password options
(most don,t) master should get you in. i have had issues with a dongle ounce. but if you are not familiar with toshiba dk programming especially with adminxx you can get in a lot of trouble. so practice on a non-crtical or bench system first.

Thanks Martin. Yes, Master got me in the software. The system was dropped on me without warning. I have the actual laptop used to admin the switch. The database is here, but so far I haven't gotten the dialer to work for a remote. I hope I have better luck with a direct connection.

Thanks for the warning on hosing the system. I am a total toshiba newbie,So I will proceed with caution.

Right now the only pressing issue is to redirect a couple of DID's. looks simple enough, but I know how that usually works out!

If all you need to do is redirect 2 DIDs use a 20 button phone plugged into port 005 and do program *09 you will be in and out in 2 mins.
Thats alot easier than hooking up the laptop and backing up the system then make the change then uploading

[This message has been edited by SSPhone (edited March 10, 2003).]

for remote you need a piou card I believe and then just have someone transfer you to #19. when you first setup the dkadmin for the switch you need to know the closest match to the proc version. then do a backup first thing and after which it will display the right version. as well as you having a backup in the event you mess it up.