ip on a 424|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

ip on a 424 #178114 08/25/04 08:54 AM
Joined: Mar 2001 Posts: 581 northern lower mi martin OP Member
OP martin Member Joined: Mar 2001 Posts: 581 northern lower mi	one of my cust has a 424 and wants to add ip connection to his wlan. he is lookong for an e&m tie line circuit. i need to upgrade the processor and add another cabinet and of course an remu. anyone ever do this with a dk? m

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: ip on a 424 #178115 08/25/04 11:08 AM
Anonymous Unregistered
Anonymous Unregistered	We did it about 3 years ago with a BVPU in a DK424. Customer has a DK40 in Alabama; installed BVPU at each site connected via T-1 LAN connection. BVPU is programmed as TIE E&M (same as REMU). There is an administration program you will need from FYI site to program the units. This application worked very well, until Customer recently upgraded to CommServer. Hope that helps........ Dan

Re: ip on a 424 #178116 08/26/04 02:20 AM
Joined: Mar 2001 Posts: 581 northern lower mi martin OP Member
OP martin Member Joined: Mar 2001 Posts: 581 northern lower mi	thanks k i,ll check that out m [This message has been edited by martin (edited August 26, 2004).]

Re: ip on a 424 #178117 08/27/04 02:54 AM
Joined: Mar 2001 Posts: 581 northern lower mi martin OP Member
OP martin Member Joined: Mar 2001 Posts: 581 northern lower mi	k what does the bpvu have that the remu does not. m

Re: ip on a 424 #178118 08/27/04 10:55 AM
Anonymous Unregistered
Anonymous Unregistered	REMU provides for Copper wire E&M Circuits. BVPU uses and RJ45 connection to the customers Data network and programs like an REMU

Re: ip on a 424 #178119 08/28/04 12:31 PM
Joined: Mar 2001 Posts: 581 northern lower mi martin OP Member
OP martin Member Joined: Mar 2001 Posts: 581 northern lower mi	thanks k that is what i need just download the utility from fyi? and i'm up and running. i'll probabley need a little help if they decide to proceed with the upgrade. m

Re: ip on a 424 #178120 08/29/04 01:22 AM
Anonymous Unregistered
Anonymous Unregistered	Martin - Thats it. Goto FYI, Strata Systems Software and look for Toshiba Maintenance Console Software, Version 5.0.5 for BVPU1A (03/21/01). Download both files and install on your laptop. Its been awhile since I've done this one, but I'll try to help. Feel free to e-mail me for my phone number (or ask SSPhone - he has it). Dan [This message has been edited by keukavly (edited August 29, 2004).]

Moderated by Carlos#1, phonemeister

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems ip on a 424