atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Analog ports on DK40i

Probably a mistake from prev prog

What did you do about 010 -011 in 81 ?

"What did you do about 010 -011 in 81 ?"

I checked them and there were no LEDs on in 81. I think 009 was in 81 prior to the analog install. Probably for what was, at the time, phone station 19 or 20. Station 19 changed to 33 and station 20 changed to 22. Not sure why, but that's what it did. I guess it reconfigured some of the ports when the analog board went in, but the prog 81 on 009 stayed and that was tripping me up.

Tested several times... it's all good... working exactly as hoped for.

jw

Oh... and since it's working so well for me I'd like to put in a plug for the DataLabsUSA EVM 4-port voice mail unit. It seems to work exactly as advertised and I thought the price was good. The support by email and phone was good too.

I compared it to 4 port systems like Amanda and Aleen and one other I can't recall and the Toshiba Strategy.

I'm happy with the choice.

jw

Well I think its time to close this topic and be happy it all works and go have a beer.

(Sounds of a lot of gulping)

Gota goo homee fore tooo wobba wee ta dwive.

One more note for anyone interested...

After all the issues above the VM system would NOT answer more than one call. Internal calls would rollover but I quickly discovered that outside calls were not "hunting" or rolling to the next port when the one was busy.

I rechecked prog 33 and everything there was good, but it still would not hunt when the call was from outside.

So, I looked at the distributed hunt group prog which is *40 as suggested in above posts and tried that. I created a group 900 and put ports 008-011 in that group and then put 900 in prog 82.

That seemed to do it. Everything working well as before and now it actually rolls to an open port.

Thanks and Happy New Year!

Mazel Tov, you get an A for effort, an A for reading, and an A for perseverence.

It works, Happy New Year.