|
Joined: Aug 2002
Posts: 1,075 Likes: 1
Member
|
OP
Member
Joined: Aug 2002
Posts: 1,075 Likes: 1 |
I have a CTX 100 and I am supposed to add a BDKU card to add only 2 more phones (DK2010SD). Here is what we have
Slot 1: BDKU/BDKS Slot 2: RCOU (4 lines) Slot 3: IVP8,2 port vmail Slot 4: This is where I'm adding the BDKU
First card I got turned out to be bad. No phone worked. Then I got a replacement. The phones come up, but on a outside call, there is no sound. On an inside call, you can talk fine. When you call into the voicemail, you can hear the system loud and clear but once you log-in to your mailbox you get eventually get disconnected after 30 seconds or so.
I've programmed the card at ADKU BDKU and then BDKU and PDKU, all work the same. THe strap on the card has been both PDKU and BDKU, same results.
I'm getting another card but I can't be sure if it's the cards or me. :shrug:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
The strap on the card has to be PDKU, why not just use a cheap PDKU card in the first place?
Have you programmed the slot for a PDKU card? You can't just slide it in and have it magically know it is a PDKU card, now can you? Noooooooo.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Did you recycle the power after assigning the BDKU in the slot?
|
|
|
|
Joined: Jul 2006
Posts: 728
Member
|
Member
Joined: Jul 2006
Posts: 728 |
Licensing also might be the issue.
|
|
|
|
Joined: Aug 2002
Posts: 1,075 Likes: 1
Member
|
OP
Member
Joined: Aug 2002
Posts: 1,075 Likes: 1 |
I've programmed the card in the slot correctly and I am positive I don't need any licenses. no I haven't power cycled the unit. I'll try that.
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
Member
Joined: Sep 2004
Posts: 1,436 |
In addition to programming the slot, you also have to assign stations to that card. The jumper should be on BDKU.
Joe --- No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
Joined: Aug 2002
Posts: 1,075 Likes: 1
Member
|
OP
Member
Joined: Aug 2002
Posts: 1,075 Likes: 1 |
GOT new card and problem solved!
yes, i assigned the stations (230 and 231, equipment numbers 010401 and 010402)
|
|
|
Forums84
Topics94,307
Posts638,895
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (JBean3329),
122
guests, and
139
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|