sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems StrataNet and Transfer to VM help

You would have to dial a conf first with a caller on the line I would think, or they would just hear the DTMF for 80 in their ear.

I tried this and havent been able to get it to work. Im thinking it worked in your setup because it was a single central VM setup on all CIX/CTX's to point to that Vm server, in the 579 Sys VM data - FB 16.
Any other ideas anyone?... Still drivin me crazy to figure it out. Dialing remote node 191 then #407 returns fast busy, dialing its own local node 190 #407 will return the 3 beeps like it accepted the command. maybe this will help?

I found my answer... In the Network eManager 5.2 manual, it says "Not all Stratagy features available to a single switch are available to remote Strata Net nodes. This is a result of the local node being directly integrated to the voice mail system. The following table shows the availability of voice mail features across the Strata Net." It has "Transfer Direct to Voice Mail - Attached Node-OK... Remote Node-R1.3 and higher" This looks like where my limitation is.. The other CTX670 i was working with has an older CPU... Mystery Solved... Ohh and BTW.. Network eManager 5.2 is awesome! Released 4-09

Upgrade that remote node, it can at least go up to 3.x software.

Gotta show some props to NeManager too, it makes managing networked systems so much easier.