atcomsystems.ca/forum Forums Other TDM Phone Systems Other Telephones & Systems Bogen multicom 2000

Never worked on one of these before so bare with me !!!!!
Every thing works but the admin phone will not connect to system to change time or bell schedules ?
you can page Fine any quick ideas

the admin phone has diplay (Clock is off on phone from the last time you powered it down} there is no dial tone but if you do a #0 I belive you can page to all speakers
you can do a #9 and it displays menu then when you do a #5 it ask for password 1234 is password... you can here beeps on admin phone like it is trying to connect, then you get error connnecting hangup try again
message on admin phone everything works there pages and bell schedules but you can't get in and change time or bell schedules

if I knew a dealer around evansville ,In. I would glady let them have it!!!!



[This message has been edited by HammerHead (edited September 10, 2005).]

Please complete your profile. I would have suggested poking around Bogens website for information, but the Multicom 2000 is a authorized dealer-only product.

Does this post help?
https://www.sundance-communications.com/forum/Forum13/HTML/000143.html

Do you get dial tone on the admin phone? Does display work?


PROFILE PLEASE BEFORE YOU RESPOND.
------------------


[This message has been edited by MARK3906 (edited September 09, 2005).]

[QUOTE]Originally posted by HammerHead:
[QB] Never worked on one of these before so bare with me !!!!!
Every thing works but the admin phone will not connect to system to change time or bell schedules ?
you can page Fine any quick ideas

the admin phone has diplay (Clock is off on phone from the last time you powered it down} there is no dial tone but if you do a #0 I belive you can page to all speakers
you can do a #9 and it displays menu then when you do a #5 it ask for password 1234 is password... you can here beeps on admin phone like it is trying to connect, then you get error connnecting hangup try again
message on admin phone everything works there pages and bell schedules but you can't get in and change time or bell schedules

if I knew a dealer around evansville ,In. I would glady let them have it!!!!

I wish you the best of luck, I worked for a sound company in NJ and we took over support of one of those installations. It's been a few years but I remember the Multicomm being married to a Comdial switch. Is that what you're dealing with? If it is one big problem is boot up sequence. If the phone switch didn't lose power but the Multicomm did, you would administrative control of the Multicomm. If you're still having problems, I can contact some of my old buds to try and get more info.

The admin phone needs to be connected to the first port on the relay card which is by default programmed for level 9 access. Once you can access programming, you can set other ports to level 9 if more admin phones are required.

The level setting determines what administartive features are enabled for a specific station port.

Can't do an all page or set schedule on admin phone only can page by by dialing 911 bells work can make a page but only using 911 gives me a fast beeping tone when dialing #0

Hello Jamie Welcome to Tech Talk

For a better response you should start a new thread with your questions. Please click on the
at the top of page and start a new thread. Also try to give as much info on the equipment and problem you are having. If things don't work as normal try rebooting the system.

That phone also needs power usually a little brick transformer see if you can find it. Usually right by the phone or plugged in in the back of the cabinet connected to the station cable.