|
|
Joined: Dec 2006
Posts: 3
Member
|
OP
Member
Joined: Dec 2006
Posts: 3 |
I recently bought a Bizfon 680 unit. USED. I hooked up a phone line to CO1 and a analog phone to extension 1 and powered up the unit. the lights start flashing as it boots up. i end up with 3 green lights on and thats it. i dont get any audio message and i am unsure where to go from here. does anyone have any ideas. besides throwing it away and buying another one? Thanks, George
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2005
Posts: 818
Member
|
Member
Joined: Dec 2005
Posts: 818 |
Are you using these steps:
1. Plug all devices in the correct place. 2. Plug power in (must wait until phones and lines are pluged in). 3. Wait for about 90 seconds until you hear :The Bizfon is ready..." 4. Press Blue button. 5. Follow all instructions.
If you are not getting any audio after all that I suppose you could have a bad speaker on the unit. Also, I am not sure, but you might have to have a Bizfon phone for ext. 100, but that could be totaly wrong.
Steve
|
|
|
|
Joined: Dec 2006
Posts: 3
Member
|
OP
Member
Joined: Dec 2006
Posts: 3 |
Thanks i have Bizfon phones on the way. i will try it again when it gets here. i thought about the speaker not working so i went ahead and pressed the blue button and it didnt seem to do anything. also i was wondering if anyone knew the meaning of the 5 green led's. i know one is Power and i am not sure what the other 4 are for. i will keep trying and thanks for the input. George
|
|
|
|
Joined: Dec 2005
Posts: 818
Member
|
Member
Joined: Dec 2005
Posts: 818 |
Where are the othe LEDs? I know that the Lines have an LED to let you know they are working, and if I remember correctly so do the telephons....but could you describe where they are?
Steve
|
|
|
|
Joined: Dec 2006
Posts: 3
Member
|
OP
Member
Joined: Dec 2006
Posts: 3 |
inside the unit in the back right corner there are 5 LEDs. they are all labeled. 1. PWR 2. ADSP 3. MOT 4. SH3 1 5. SH3 2 I am not sure what they are for but during the boot they flash and what not...and then when it stops booting 1, 2 and 3 are on and the others are off. I never hear any sound from the speaker and it goes through the process of booting and then the illuminated bizfon button goes off and it sits there forever. i have tried hooking up some bizfon2 phones and it makes no difference. any help would be greatly appreicated. Thanks, also if anyone knows of anywhere i can get it repaired i would appreciate it as well. George
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (dexman),
117
guests, and
413
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|