|
|
|
|
Joined: Dec 2007
Posts: 4
Member
|
OP
Member
Joined: Dec 2007
Posts: 4 |
Any recomendations on a Cisco product to provide two T1 point to point connections.
The application is to tie to Non-IP PBX's togather. They will be running ESF-B8ZS with QSig. The network link is an already operational gig fiber, Cisco on both sides, private network. :bang:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2006
Posts: 30
Member
|
|
Member
Joined: May 2006
Posts: 30 |
"tie to Non-IP" What protocol are you going to transmit across the circuit then to carry traffic if its non-ip?
Depending on what Cisco gear they have in place already for their data you can get away with a couple of T1 wics to go in the exisiting routers. Or you can on the cheap buy 2 1721's with T1 wics and do it.
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (James D.),
75
guests, and
300
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
