|
|
Joined: May 2004
Posts: 24
Member
|
|
Member
Joined: May 2004
Posts: 24 |
Ok, I have a 6414L on the line... and things still dont seem to work correctly. When you say I need the Paired port for it to work correctly, can you elaborate for me? There is only one jack on the desk set, so would I need to run the physical line to the unit? If so plug it in where? I appreciate all your help and patience in working through this with me.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
OK, The paired ports are 10-11 12-13 14-15 16-17 18-19 and so on. So lets say you want to put the that phone on 10. Then you shouldn't have anything connected to 11. It's been a long time but if I remember right you just hook the 6414L to 10 and with nothing on 11 it should give you lights.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: May 2004
Posts: 24
Member
|
|
Member
Joined: May 2004
Posts: 24 |
Ok, thanks so much for taking the time to help me with this. Unfortunately, its not working. I have a 6414L on 10 and nothing on 11. I tried to program the button and the DSS feature works, but the blf does not. Its really the blf the customer is after (of course). Is there a way to test the lights on the set? Is there another programming step I am leaving out? Any help would be appreciated tremendously.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Did you tell it that it was a DSS/BLF in programming? In Station COS it would not be assigned per default.
At station 10,
Press Intercom *746*
Dial 10
Press (Recall)
Press (Spkr) or (Monitor)
[This message has been edited by dtmf (edited May 13, 2004).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: May 2004
Posts: 24
Member
|
|
Member
Joined: May 2004
Posts: 24 |
Which port do I tell the system is the dss/blf? The 10 or the 11?
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Sorry you posted to fast for me, I put the steps in my last post.
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: May 2004
Posts: 24
Member
|
|
Member
Joined: May 2004
Posts: 24 |
Hey thanks it all works now. Just FYI for any others that still have these sets they want to use... The station lights correspond to the actual position/number of the led not the programmed dss at the position. On this phone it starts at 12 and works down to 18 and starts again at 19 at the next column. Hey thanks I really appreciate all the help you guys have given me on this!
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You bet, tell them to enjoy there lights ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/biggrin.gif) And yes it will start at 12 and correspond with the stations [This message has been edited by dtmf (edited May 13, 2004).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
Forums84
Topics94,562
Posts640,147
Members49,863
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
53
guests, and
71
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
