|
|
Joined: Aug 2007
Posts: 7
Member
|
OP
Member
Joined: Aug 2007
Posts: 7 |
Hello, Thank you everyone one more time for the previous suggestion in regards crossover cable.
My new problem is Cisco and Comdial are trying to negoiate ISDN. The first level of negotiation is completed. However, the second is fail. If I am turning on debug on Cisco it shows that a bad frame is coming from Comdial. I have two questions: If anybody knows what is it? The second question: If there is way to turn on any kind of debug on comdial to see ISDN negotiation, similiar what I can see on Cisco Router...
Thank you Egor
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
If it is trying to negotiate ISDN then it is looking for a PRI board as I mentioned in my previuos post. You stated you had a T1...you really need to verify the FXII has a PRI board.
|
|
|
|
Joined: Aug 2007
Posts: 7
Member
|
OP
Member
Joined: Aug 2007
Posts: 7 |
It is t1/pri board. We used it as PRI before.
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
All right then we know you have the right hardware. Have the cisco programmer look at the protocol and make sure you match. Secondly make the Cisco emulate a master/CO status. See where that leads you.
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
149
guests, and
304
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|