|
|
Joined: May 2004
Posts: 2
Member
|
OP
Member
Joined: May 2004
Posts: 2 |
Hello. I have a Prostar 816 and I think my toddler was playing around with the phone and now one of my 4 phone lines is on infinite hold. It is a solid red light, and I can't disconnect it. Any ideas how to reset it without turning the main system off? I don't want to do that because I don't want to lose the programming on my phones. Thanks for your help!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2003
Posts: 115
Member
|
|
Member
Joined: Jul 2003
Posts: 115 |
I don't know of anyway todo it but if you loose your programming when power is killed your cmos battery is either dead or not turned on check to see if you have the jumper set right with the mannual if it is go to radio shack and get a 3.6 volt nicad phone battery and solder it on. make sure you turn the power off.
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
why not try and unplug all your phones and plug them back in one at a time plug the one he was playing with last it almost sounds like a phone is off the hook if its in a home look for spills in set ,a bashed hookswitch ,stuck buttons <font face="Verdana, Arial" size="2">Originally posted by kmoody:
Hello. I have a Prostar 816 and I think my toddler was playing around with the phone and now one of my 4 phone lines is on infinite hold. It is a solid red light, and I can't disconnect it. Any ideas how to reset it without turning the main system off? I don't want to do that because I don't want to lose the programming on my phones. Thanks for your help!</font>
|
|
|
|
|
Joined: Sep 2001
Posts: 2,306 Likes: 6
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,306 Likes: 6 |
If you disconnect the line from the ksu I would think the switch would drop it.
|
|
|
|
|
Joined: May 2004
Posts: 2
Member
|
|
OP
Member
Joined: May 2004
Posts: 2 |
Thanks for the advice. I disconnected the lines from KSU and it reset it. Thanks. <font face="Verdana, Arial" size="2">Originally posted by kmoody:
Hello. I have a Prostar 816 and I think my toddler was playing around with the phone and now one of my 4 phone lines is on infinite hold. It is a solid red light, and I can't disconnect it. Any ideas how to reset it without turning the main system off? I don't want to do that because I don't want to lose the programming on my phones. Thanks for your help!</font>
|
|
|
|
Forums84
Topics93,959
Posts637,376
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
