|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
I just hooked up a Prostar 816. I plugged in 6 stations and they work fine any more after that are dead. Is there something in the setup i need to do? does anyone have a manual? I plug in a 7th station and if just beeps
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
pull the cove and check the pins on the kts jumpers. make sure the are not set to sli
I will check on the jumper numbers as I dont know them off hand
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
Mr. Richey is correct on this one. Last two ports could be jumpered to SLI ports. Put a buttset on the T&R and I'll bet you get dialtone. Move the jumpers to the opposite config. I started out selling Prostar 816s many many years ago.
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
dip 3 and 8 on for x 7 to be electronic phone and dip 4 and 9 for x 8.
Also program 38 should be all "0" enter ALL 16
ports with no phones show as "n".
While your in there the dip 2 is the ram battery
for your memory backup .Its probabably long dead and if you want to change it or put a battery backup on your system b4 you do alot of programming.in any case turn it on
|
|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
Holly Crap. I'm a general contractor with limited phone experance. I pulled the covers and don't see jumpers. What is a "buttset"?
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
ok
theres a big board on the top and small board on the bottom .
the jumpers are on the top board
if you go along the bottom of the top board
there are 2 silver things in the middle ,right above some wires.
the dip switches are right above the 2 silver things.
forget about the "buttset" its the thing your doctor checks your prostrate with.
if your really lost email your phone number
and i will walk you through it.
|
|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
inside the box, there is a big board and 2 other boards mounted and data strapped to the main board. I took off the lower of the 2 smaller boards and found dip 3 and 4 and dir 8 & 9. 8 and 9 are red and white switch while 3 and 4 are jumpers.
|
|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
sorry all the jumpers/switches are in the off position
|
|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
are the other 2 boards my adittional CO and station lines?
|
|
|
|
|
Joined: Dec 2005
Posts: 8
Member
|
|
Member
Joined: Dec 2005
Posts: 8 |
behiend the board with "CO 7&8" and "STN 13,14,15&16" is where i found the jumpers. all in the off position.
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (BobRobert, justbill),
133
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
