sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems IP Connection Help

Have 3 sites, all 7200 & MGI3.

Done all programming for site to site, but not getting anywhere.

Ports open on routers are:

5000 - 5002 to MCP
6000 - 9000 to MCP
30000 - 31000 to MGI3

1 site has 3 ip phones at a remote site & cannot get voice only data (display & rings extensions)

Has anybody got a list of all required programs needed for site to site over IP?

Thanks in advance :thumb:

there are numerous programs, what have you done in the systems for the ip connections.

what kind of link do you have for the sites, pure ip or point to point connection?

Here is the list that I use whenever I am doing what you are doing....

Phone system side for port forwarding:
6000 TCP and UDP will be pointed to MCP.
30000-30031 TCP and UDP will be pointed to the MGI.
1024-4999 UDP will be pointed to MCP.

IP phone side:
6000, 9000, and 9001 UDP open on the router.

Now, you also have to go into MMC 840 and select the IP phones that you want to program. After you open them you have to go to the field that says "IP Type" and you will change it to "Public w/Firewall" If you don't set that in 840 then you will get 1 way audio. Also, make sure those ports are open on the phone side, that is important.

Let me know if that works...