sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Blocking Station to Station Calls

Ah, that explains a few things, thanks pvj. I downloaded it because our paper manual didn't have the details for the Dial Number Plan. As for our paper manual, there is no Stn to Stn Use MMC that I can find. How involved of a process is it to tenant the system? As I said, blocking the Intercom feature on the stations' COS works, but blocks calls to 529 which I need for them to be able to call.

MMC 803 is where you can tenant the system.I have never had the need to do it but I believe it does not allow the tenants in 1 group to call the other.As for does it allow voicemail access for both tenants ,you'll have to try it.That's your only hope on the DCS to get it to do what you're after.

After some digging, I have come up with an idea. If I were to put our voicemail trunk in the lowest station group, then the SLI lines in the second lowest, then our digital lines in the highest station group, could I then use [MMC(COS CONTENTS)=>Station Group xx Calling] to allow calls only to certain station groups? Forgive me for asking here, I would have to rework a lot of our system setup to try this, so I wanted opinions first. Thanks again, you guys are a huge help! :banana: