|
|
|
|
Joined: Jan 2008
Posts: 148
Member
|
|
Member
Joined: Jan 2008
Posts: 148 |
The way I keep from loosing rod is to loop a bit of tape around the screw join and they wont twist apart while you are dragging them around. It isn't enough to cause a snag or peel off either.
I've found when they untwist partly that is the time they are most prone to breaking. If you keep a length of broken rod they are good for reaching with provided you keep the end you can put a hook on.
About me:
8 years of network support
7 years IT field service
Always looking for the next project to be done.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033 |
Originally posted by igadget:
The way I keep from loosing rod is to loop a bit of tape around the screw join and they wont twist apart while you are dragging them around. It isn't enough to cause a snag or peel off either.
I've found when they untwist partly that is the time they are most prone to breaking. If you keep a length of broken rod they are good for reaching with provided you keep the end you can put a hook on. You can buy new ends and set them with epoxy. https://www.lsdinc.com/content/product_details/49 ---> bottom of the page
- Tony Ohio Data LLC Phone systems, data networks, firewalls and servers in Central Ohio. Some people aren't used to an environment where excellence is expected.
|
|
|
|
Forums84
Topics94,542
Posts640,065
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
147
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
