|
|
|
|
Joined: May 2008
Posts: 2
Member
|
OP
Member
Joined: May 2008
Posts: 2 |
have esi ivx20 system can anyone provide
wire diagram to attache from main box to blocks to operate 3 stations with 2 active lines.
have 3 pig tails from main system box cut when we moved the main board.
thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2005
Posts: 3,124
Member
|
|
Member
Joined: Oct 2005
Posts: 3,124 |
This system should only have 1 25 pair amphenol cable connected on the right side. If there are more than 1 location to connect then it isn't a "20".
Pairs 1,2 & 3 will activate the extensions.
Pairs 20 & 21 is where to feed in the CO lines.
|
|
|
|
|
Joined: Oct 2005
Posts: 3,124
Member
|
|
Member
Joined: Oct 2005
Posts: 3,124 |
I have learned via PM that some odd practices were used to create what was referred to as "3 pig tails". I responded with the following:
I wish you luck with whatever you choose to do. I strongly recommend purchasing a male amphenol cable (only about 10 bucks) to wire to a 66 block. Sure will help in the future. The "20" is a damn good system. I would hate to see it get blamed for trouble due to poor install practice.
|
|
|
|
|
Joined: May 2008
Posts: 2
Member
|
|
OP
Member
Joined: May 2008
Posts: 2 |
grider
thanks for the good advice have ordered parts will install and clean up system.
terry
|
|
|
|
Forums84
Topics94,298
Posts638,870
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
98
guests, and
304
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
