|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
I stand corrected. I just looked up F225 in the manual:
F225:..."If the PRI span is used for outgoing calls, pilot table entry 1 is used for outgoing Caller ID, as well. Because of this, pilot number entry 1 should always be programmed with 10 digits....
Note: An extension’s Caller ID number setting (see “Function 31:....Extension definition and routing) overrides the pilot number’s Caller ID information set here."....
F31:...Caller ID  Used for outgoing calls to identify the extension and for callback to the specific extension or another extension nearby. Each entry must be valid and 10 digits in length.
If there is no entry here, the PRI pilot number will display as Caller ID....
This may not help but but worth a try: disable PRI Caller ID Forward in F166. I've had two carriers that this cleared up some outbound issues with.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2010
Posts: 68
Member
|
|
Member
Joined: Nov 2010
Posts: 68 |
Resolution: The sw and switch was an outdated bind, we upgraded the whole thing, and it is working now.
|
|
|
|
Forums84
Topics94,562
Posts640,148
Members49,863
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
69
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
