|
|
|
|
Joined: Mar 2009
Posts: 46
Member
|
|
Member
Joined: Mar 2009
Posts: 46 |
OK now i am really confused.. To me the way the programming is, the LD t1 is not even being used. "i think" the t1 for LD are the first 24 channels in CO group 2. The 12 POTS lines are in CO group 1. When i look at the Class 17 everything is set to go out CO group 1. To me that means that all the calls are going out the POTS lines. Now that may be the case because just to be sure that the LD got billed to our LD carrier i had all the POTS lines PIC codes set to be our LD carrier for the T1. I guess i could try to have someone on site pull the T1 cable and see what happens.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,811 Likes: 15
Moderator-Iwatsu
|
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,811 Likes: 15 |
The settings in Office Code and AREA Code in Class 17 refer to Routing Tables, not trunk groups. Check the appropriate routing table to see which trunks are actually being used.
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
|
|
Joined: Jan 2010
Posts: 7
Member
|
|
Member
Joined: Jan 2010
Posts: 7 |
Check 17.06 Route Table if it shows 1 1 1 vertically change the settings to 2 2 2 and test this will changethe trunk group selected by that route table. If your switching over to a PRI the simplest fix is to change the trunk group of the PRI to whatever the T-1 is and set the T-1 group to say 10 and don't mess with trying to remove programming.
John B.
|
|
|
|
Forums84
Topics94,513
Posts639,939
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
170
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
