|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Can someone please tell me how to reset the time on my 2830 phones? Heck, I can't even find the display!  John C. (Not Garand)
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
John -
Press the Hold key & the transfer button down for 5 seconds. That will automatically activate the direct connection to the master clock in Greenwich, England. Then just hit the # key once for each hour you're past GMT.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Jan 2002
Posts: 196
Member
|
|
Member
Joined: Jan 2002
Posts: 196 |
$100 to whoever can find the transfer button on a 2830! :rofl:
COMTEK Technologies, Inc.™ Information Technologies Integrators™ Celebrating 37+ Years Serving California & The Western United States! (619) 266-1000 • (800) 525-7100 an interCONNECT-IT™ company
|
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
On the ITT sets they were the little black button on the faceplate.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Send Sam his $100.00! Wish I'd gotten here first. The least you can do is split with me, Sam. After all, I did the setup! John C. (Not Gatand)
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
John -
Every act needs a straight man.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Jan 2002
Posts: 196
Member
|
|
Member
Joined: Jan 2002
Posts: 196 |
Silversam and Lightninghorse, Not so fast there gentlemen... The little black button on an electromechanical 1A2 system's model 2830 keyset was called an "Operator Recall" button. When pressed by the keyset user, it performed a hookswitch flash. Now, if the 2830 was connected to a 1A2 system that was connected to (behind a) PBX then yes that button, performing a hookswitch flash on the PBX extension, could ultimately be used for transferring a call (within the PBX) to another extension. This flash-to-transfer senario would also hold true if the 2830 was connected to a PBX system with built-in 1A2 keyset support, such as ITT's TD series. Either way, the true function performed by the Operator Recall button was a hookswitch flash and not a transfer. Technically, transferring a call was not a function available within a 1A2 system, with which the 2830 is most truly associated. So, I think I get to keep my $100!
COMTEK Technologies, Inc.™ Information Technologies Integrators™ Celebrating 37+ Years Serving California & The Western United States! (619) 266-1000 • (800) 525-7100 an interCONNECT-IT™ company
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Actually, with Centrex, (I know, C.O. PBX) you could transfer to any other associated location. At any rate, "Picky, picky, picky".  John C. (Not Garand)
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
I'll buy that. Luckily I hadn't spent my ill gotten gains yet.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
|
Joined: Jan 2002
Posts: 196
Member
|
|
Member
Joined: Jan 2002
Posts: 196 |
Lightninghorse,
I almost mentioned Centrex. But, I figured I'd wait and see who decided to add that. But, as your "I know, C.O. PBX" comment acknowledges, the transfer function is still outside of the 1A2 system.
Well, at least I know you're awake... and having to rustle through the cobwebs of your mind as I did.
COMTEK Technologies, Inc.™ Information Technologies Integrators™ Celebrating 37+ Years Serving California & The Western United States! (619) 266-1000 • (800) 525-7100 an interCONNECT-IT™ company
|
|
|
|
Forums84
Topics94,544
Posts640,075
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
122
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
