|
|
Joined: Jul 2003
Posts: 5
Member
|
OP
Member
Joined: Jul 2003
Posts: 5 |
Well I just cant get the darn thing to work in the Loud Ringer Adapter application. Installed in bottom of a 12 button keyset and see a constant 25VDC sitting on the T&R. No reaction to ringing current at the keyset. Have followed mannual instructions for configuring the LRA. Has anyone out there made this thing work. Maybe there is sometyhing else faulty or should be turned on, but i really dont know how to troubleshoot it. Any help would be appreciated. THANX
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
If you are sure you have the Data Port module straps set right and have the wiring correct, about the only thing I can think of is to be sure that you have programmed Handsfree Disable on the set, also some units require that polarity be correct.
[This message has been edited by dtmf (edited August 10, 2004).]
|
|
|
|
Forums84
Topics93,967
Posts637,414
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)