|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
John, thank you for your comments. And welcome to the board!
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2009
Posts: 21
Member
|
|
Member
Joined: Nov 2009
Posts: 21 |
Thanks for your welcome Dave! I'm still trawling through all the posts - fascinating website, with all sorts of info. I only stumbled in here looking for information about some 1A2 phones that I have (they are not common in the UK, and information is quite scarce over here).
Thanks again,
John
|
|
|
|
|
Joined: Dec 2009
Posts: 5
Member
|
|
Member
Joined: Dec 2009
Posts: 5 |
Originally posted by Arthur P. Bloom: European pulse dialing was the exact opposite. When I was in New Zealand a few years ago I picked up a few older rotary phones. They use dials that went from 9 up to 0, only the 5 and the 0 sent the same number of pulses as in North America. As I understand it, it was to get around copyright issues with the dials and strowger switches. Consequently, in New Zealand you commonly dial "1" to get an outside line from a PBX, on a rotary phone you would have been sending 9 pulses. this system may have been used elsewhere but was not commonplace around the world.
|
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
188
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
