web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#525595 09/10/09 04:40 AM
Joined: Nov 2004
Posts: 524
aweaver Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 524
Need a bunch of FXS ports behind your Allworx system? No problem! The Cisco SPA8000 makes a great gateway for use with Allworx. It provides hunt group capability and CPC disconnect supervision. Users on the Cisco can park calls by hitting flash 700; Allworx will announce the park location or dial a park location number to retrieve parked calls. Email us if you need detailed configuration instructions. We did all the testing here in our lab.


ElectSys Tech LLC
Hosted Phone Systems Solutions Provider
Allworx, Sangoma, FreePBX
Telephone & computer systems in the Jefferson City, Columbia MO area.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Dec 2005
Posts: 222
Member
Offline
Member
Joined: Dec 2005
Posts: 222
Thanks for the great info. I would like the config settings


Serving greater Fond du Lac WI with Allwrox and Panasonic Phone Systems
www.fdl.net
www.jzorn.com
Joined: Sep 2006
Posts: 149
Member
Offline
Member
Joined: Sep 2006
Posts: 149
The SPA8000 is configured much like the PAP2, isn't it?

Joined: Nov 2004
Posts: 524
aweaver Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 524
Yes. They're both Sipura products I believe. SPA is an 8 FXS with the added function of hunt groups. Hunt groups allow you to create your own line rollover sequence behind a single SIP registration. We have also been using this gateway with ITSPs such as nexvortex.com


ElectSys Tech LLC
Hosted Phone Systems Solutions Provider
Allworx, Sangoma, FreePBX
Telephone & computer systems in the Jefferson City, Columbia MO area.
Joined: Aug 2005
Posts: 85
Member
Offline
Member
Joined: Aug 2005
Posts: 85
So we can use the Cisco SPA8000 analog port for faxes and have the SIP DID's point to the faxes and work w/o glitches? Looking for a way to eliminate the hard wired fax lines. Thanks.

Joined: Sep 2006
Posts: 149
Member
Offline
Member
Joined: Sep 2006
Posts: 149
If it supports the T.38 protocol then faxing should work reliably.

Joined: Dec 2005
Posts: 818
Member
Offline
Member
Joined: Dec 2005
Posts: 818
Just because the system supports the SIP DID's or T.38 does not necessarily mean the SIP carrier will support faxing over their network. Make sure they do.

Steve

Joined: Nov 2004
Posts: 524
aweaver Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 524
Here's a quote from the manual. We have not tested it, so I can't speak from field experience.

"Note: One fax machine is connected to each pair of ports to illustrate that only one T.38 connection is supported by each of the four pairs of RJ-11 ports. Up to four T.38 fax machines can be connected to the SPA8000, but they must be connected on every other port as shown."


ElectSys Tech LLC
Hosted Phone Systems Solutions Provider
Allworx, Sangoma, FreePBX
Telephone & computer systems in the Jefferson City, Columbia MO area.
Joined: Nov 2004
Posts: 524
aweaver Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 524
We finished testing today with the SPA8800 (4) FXS and (4) FXO gateway. PM me if you wish to have the integration notes.


ElectSys Tech LLC
Hosted Phone Systems Solutions Provider
Allworx, Sangoma, FreePBX
Telephone & computer systems in the Jefferson City, Columbia MO area.
Joined: Jan 2010
Posts: 1
Member
Offline
Member
Joined: Jan 2010
Posts: 1
I have installed a Cisco SPA8000 connected to a
Linksys WRT54g router. I put the SPA8000 in a DMZ.
The ITSP is Nexvortex. I can make calls fine with
good audio both ways. When incoming calls are answered the audio is 1 way (can't hear the caller).
Would changing to the WRT54gl fix this? I noticed on a Linksys forum that SPI may be a cause for this problem. This is the 1st SPA8000 I've installed.

Page 1 of 2 1 2

Moderated by  JWRacedog 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,113 Shoretel
187,718 CTX100 install
186,811 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
Who's Online Now
2 members (justbill, Touch Tone Tommy), 66 guests, and 419 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5