|
|
|
|
Joined: Mar 2003
Posts: 679
Member
|
OP
Member
Joined: Mar 2003
Posts: 679 |
Ok, so iam just starting to learn some of the VoIP cisco stuff, I have set up a small lab system with a ISDN PRI emulator and old 3640 with CME on it and a MC3810 with a T1/PRI in it to use as a gateway.
I have the inbound calls coming into the 3810 and going back out H-323 to the CME ok. I can dial the 4 digit extension numbers and recieve calls.
I am now trying to figure out the dial-peers in the CME to send the calls out to the 3840.
Any one got some ideas ?
DJ
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 131
Member
|
|
Member
Joined: Aug 2005
Posts: 131 |
Most 3810s don't support VoIP just VoFR and VoHDLC. Normally when you want to send a dial peer to a voip gateway you use the command session target ipv4:192.168.222.1 pointing to the voip gateway. What code are you running on it? You can configure the FXO like this:
voice-port 0/0/0
no vad
no comfort-noise
connection plar 25440 (Overlay on phones)
description 276-xxxxx
caller-id enable
!
voice-port 0/0/1
no vad
no comfort-noise
connection plar 25440
description 276-xxxxxx
caller-id enable
!
voice-port 0/0/2
no vad
no comfort-noise
connection plar 25440
description 276-xxxxxx
caller-id enable
!
voice-port 0/0/3
no vad
no comfort-noise
connection plar 25440
description 276-xxxxxx
caller-id enable
!
voice-port 0/1/0
no vad
no comfort-noise
connection plar 25440
description 276-xxxxxx
caller-id enable
!
voice-port 0/1/1
no vad
no comfort-noise
connection plar 25440
caller-id enable
!
voice-port 0/1/2
no vad
no comfort-noise
connection plar 25440
caller-id enable
!
voice-port 0/1/3
no vad
no comfort-noise
connection plar 25440
caller-id enable
!dial-peer voice 10 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/0/0
forward-digits all
!
dial-peer voice 11 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/0/1
forward-digits all
!
dial-peer voice 12 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/0/2
forward-digits all
!
dial-peer voice 13 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/0/3
forward-digits all
!
dial-peer voice 14 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/1/0
forward-digits all
!
dial-peer voice 15 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/1/1
forward-digits all
!
dial-peer voice 16 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/1/2
forward-digits all
!
dial-peer voice 17 pots
description Inbound Call Leg
incoming called-number .
direct-inward-dial
port 0/1/3
forward-digits all
!
!
dial-peer voice 91 pots (outgoing peers)
preference 4
destination-pattern 9.T
port 0/0/0
!
dial-peer voice 92 pots
preference 3
destination-pattern 9.T
port 0/0/1
!
dial-peer voice 93 pots
preference 2
destination-pattern 9.T
port 0/0/2
!
dial-peer voice 94 pots
preference 1
destination-pattern 9.T
port 0/0/3
|
|
|
|
|
Joined: Mar 2003
Posts: 679
Member
|
|
OP
Member
Joined: Mar 2003
Posts: 679 |
Hmm, the 3810 must be doing Voip or it would not be passing the calls from the 3810 down to the 3640 running CME.
As I said I need the 3640/CME to send via voip calls from it up to the 3810 and out the PRI.
The 3640 has no voiceports in it at all.
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (pvj),
129
guests, and
350
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
