|
|
|
|
Joined: Mar 2011
Posts: 6
Member
|
|
Member
Joined: Mar 2011
Posts: 6 |
I have a bogen Multicom 2000 and definity I have been asked to help work on. The bogen is working fine, when we connect the definity with aux port trunk and page through the definity the page goes through but very low, Bogen tech support states that there is nothing we can do on the multicom. We have tried the loop start trunk and still the same. Has anyone run into this and is there anything we should try next?
Thanks in advance.
|
|
|
|
|
Joined: Oct 2010
Posts: 98
Member
|
|
Member
Joined: Oct 2010
Posts: 98 |
Is there a 600-ohm transformer between the two? It may be required. Also, are you using a UPAM or any other adapter between the two?
|
|
|
|
|
Joined: Sep 2005
Posts: 9,289 Likes: 15
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,289 Likes: 15 |
You may need a matching/isolation transformer. Make sure that both sides match the impedance you connect to.
|
|
|
|
|
Joined: Jan 2007
Posts: 1,951 Likes: 2
RIP
|
|
RIP
Joined: Jan 2007
Posts: 1,951 Likes: 2 |
Try a 909 coupler. That should do it.
"Press play and record at the same time" -- Tim Alberstein
|
|
|
|
Forums84
Topics94,490
Posts639,855
Members49,833
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (hbiss, Toner),
688
guests, and
171
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from i1107.photobucket.com]](http://i1107.photobucket.com/albums/h382/bpitt1237/Linuxcertified.jpg)
![[Linked Image from i1107.photobucket.com]](http://i1107.photobucket.com/albums/h382/bpitt1237/NetworkCertified.jpg)
