|
|
Joined: Jan 2014
Posts: 2
Member
|
OP
Member
Joined: Jan 2014
Posts: 2 |
I am trying to install a DSS console in a KX-TAW848 system. The DSS I bought was the KX-T7740 which the manual says is the correct one. I have it connected. It shows up as an APT, not as a DSS. I had plugged it into the regular port on an PLC8 card, and I also tried to connect it to the pre-installed hybrid ports. Is it the way the phone lines are terminated? I used the cord it came with and phone jack I wired the same as a regular outlet. I have the PC program for the PBX system. When I go to select the DSS console, it gives me an error "E00030A operation cancelled. Please set appropriate settings". I somehow need to make the extension port type a DSS from an APT
Last edited by jcrocco; 01/04/14 12:46 PM. Reason: added more info
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Connect with Console, go to CONFIGURATION/SLOT. Place courser on card you wish to use, choose PORT PROPERTY. Under TYPE on the line for the port you will use select DSS and save.
Last edited by brokeda; 01/04/14 01:25 PM.
|
|
|
|
Joined: Jan 2014
Posts: 2
Member
|
OP
Member
Joined: Jan 2014
Posts: 2 |
Thank you for the help. I Have an older software program so it wasn't exact directions but it led me to where I needed to be and I figured it out. Thanks a bunch!
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
113
guests, and
303
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|