|
|
|
|
Joined: Nov 2014
Posts: 5
Member
|
OP
Member
Joined: Nov 2014
Posts: 5 |
Hi all,
I just recently took over our phone system. One of my assigned tasks is to have the system auto switch from Night Mode (Ring Plan 2) to day mode (Ring plan 1) They are supposed to go to day mode at 09:00 and back to night mode at 20:00. Reading the programming instructions, it says "A higher numbered Ring Plan cannot have a START time before a lower numbered Ring Plan."
My original plan was to have:
Ring Plan 1 09:00 - 20:00
Ring Plan 2 00:00 - 23:59
But since Ring Plan 2 start time is earlier than #1, I"m guessing it's not going to work.
Any ideas how to program this correctly?
Thanks in advance,
Gary
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Easy, swap rp1 and 2 times.
When auto switching rp1 has to be night
|
|
|
|
|
Joined: Nov 2014
Posts: 5
Member
|
|
OP
Member
Joined: Nov 2014
Posts: 5 |
Thanks, that's what I was thinking. I "think" I got the Ring Plans swapped around, we'll see tonight / tomorrow.
Thanks, Gary.
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
133
guests, and
410
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
