sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Call Pilot log in screen

On Call Pilots I have always put the default ip adress in and the same number but one higher on the last set and boom, I'm in.

Not so with this one. I see a note saying I am connected but see a new small page that asks for User Name and below that password.

I've tried most everything but no luck.

Can you PM me the info for the User Name and the password?

Thanks, Bracha

What login screen (way of connecting) are you referring too?

Default IP for CP 100/150/mini is 192.168.110.10
This means your laptop must be 192.168.110.11 or higher.

Login
User = the System Manager Mailbox number (if asked)
Password = only the System Manager Mailbox's password

If the IP has been changed then you need to connect with Hyper terminal or alike to view the IP or to Change the IP

Straight Through Serial Cable
9600 bits per second
8 data bits
no parity
1 stop bit
no flow control

Once connected, reboot the Callpilot and watch for the IP to come up. (use page up or down to scroll), note the IP number then try again with the browser.

Or when instructed press any key within 2 seconds to change parameters and change the IP if its ok to do so.

can you email me at bunniemeyer @ gmail .com and I will reply with a photo of the log in screen, I've never seen this one before.

Thanks, Bracha Sarah

That appears to be a standard Windows login pop up screen.
It says Connect and Connecting but not connected.

It does not appear to be a Callpilot 100/150 login screen, more like the bigger brother.

Thanks, I'll try a different PC, just using Windoz XP Pro, nothing fancy.

The first CP 150 I installed oh so many years ago had to use the hyperterm procedure to recover IP. That was truly a PITA! The FedGov loves their AA and this was no exception. The GUI made building the CCR which was huge very easy. Of course, they had a paper copy!