|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I am going to be installing a IPedge where the customer currently has a PRI, I will be installing a ADTRAN gateway to convert. Anyone have a cheat sheet for this ?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
What model Adtran? I have a Netvanta NV6310 configuration file
Regards Carl
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
I also have the config files for; NV644 1 PRI NV644 2 PRI NV644 4 PRI
Regards Carl
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
|
|
|
|
Joined: Feb 2007
Posts: 1,314
Member
|
Member
Joined: Feb 2007
Posts: 1,314 |
I always use the Adtran configuration wizard that is available on FYI. Just have to make sure you have the correct firmware on your Adtran.
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I don't see that anywhere on FYI ??
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
found it , but a little confussed. under collect IP addresses, IP address for ADTRAN and subnet mask for ADTRAN does that need to match the providers IP range or the customers network or does it matter ??
Last edited by Steve Mull; 12/09/15 01:17 PM.
|
|
|
|
Joined: Dec 2012
Posts: 252
Member
|
Member
Joined: Dec 2012
Posts: 252 |
Steve - As long as you have all your info the configuration tool requires, you will be fine. We have never had to touch a GW after install except to see if the PRI is having issues. ~ Mike
Michael Meyer
|
|
|
|
Joined: Feb 2007
Posts: 1,314
Member
|
Member
Joined: Feb 2007
Posts: 1,314 |
It would match the customers network, should be on the same LAN as the IPedge. You will need to use that address for programming the trunks in the IPedge.
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
OP
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Thats what I thought but wanted to make sure... Thanks
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
96
guests, and
400
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|