|
|
Joined: Oct 2006
Posts: 1,355
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,355 |
Never tried connecting my laptop to a Call Pilot 3.1 that wasn't hooked to a KSU. I'm using a crossover ethernet cable, and I'm sure the IP address is still the default. Put the laptop on the same network range, and I can ping the CP, but not able to connect via the browser.
Do I have to have a KSU station port connected? Thanks.
Jim
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
|
|
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Yes. It needs to be connected to the KSU.
Make sure you connect the A connector.
You should have light 1 on the left side and eventually the
middle light on the right should come on.
THEN you can connect.
It could take up to 10 min for that right light to come on once you power on.
Make sure you connect to the KSU then power on.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Oct 2006
Posts: 1,355
Member
|
|
OP
Member
Joined: Oct 2006
Posts: 1,355 |
|
|
|
|
|
Joined: Feb 2005
Posts: 1,610
Member
|
|
Member
Joined: Feb 2005
Posts: 1,610 |
In case others wondering too this goes for any Norstar voice mail system.
They are designed to recycle their boot sequence until they see a KSU attached....as if the KSU has the boot file.
You would see this sequence repeat when watching via hyper-terminal.
|
|
|
|
Forums84
Topics93,879
Posts637,000
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (tim10),
39
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}