|
|
Joined: Jan 2007
Posts: 1,014
Member
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Greetings,
It has been awhile since I've done this. I need to connect a TG4C to a paging system for emergencies. Normally I would just connect to a separate unused input, However this is an older amp with only 2 inputs. One input is a microphone in the office and the other is a WMT-1A to the phone system. One thought was to parallel it to the WMT-1A the other thought is to put some sort of a mixer ahead of the amp?
TIA
John 807
|
|
|
|
|
Joined: Feb 2005
Posts: 12,334 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,334 Likes: 3 |
The TG4C has an audio input that gets "ducked" when the tone is activated. Decide which of the two existing inputs (microphone or page from the phone system) would not be used during tone activation and connect that through the TG4C to its input on the amp.
I'm not even going to ask why they have two paging sources.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Jan 2007
Posts: 1,014
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 1,014 |
Hal,
It's a Bogen SI35A. Somewhere along the line someone spec.'d the ability to page into individual classrooms and have an all call from the phone system from any phone.
Thanks for your advice.
John 807
|
|
|
|
|
Joined: Feb 2005
Posts: 12,334 Likes: 3
Member
|
|
Member
Joined: Feb 2005
Posts: 12,334 Likes: 3 |
Ahh, so it's not your usual PA amp. Fair enough.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
126
guests, and
17
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
