|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
Member
Joined: Oct 2002
Posts: 597 |
I've got a 1224 premier system that I need to access programming. All I get is garbage in hyperterminal. Can anyone guide me in the right direction on the com settings?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
Member
Joined: Oct 2002
Posts: 597 |
There is a 25 pin connector on the cpu card and I assume this is what i need to connect to. Is there software needed to program this switch?
|
|
|
|
|
Joined: Aug 2005
Posts: 6,692
Member
|
|
Member
Joined: Aug 2005
Posts: 6,692 |
The Premier can be programmed via pretty much any terminal program like Hyperterminal. The most likely problem is that you're talking at the wrong speed. On the CPU card you will see a jumper that sets the baud rate for the communication. If for instance it's set at 1200 Baud, then you must set Hyperterminal for 1200 Baud. The jumpers are 300, 1200, 2400 & 4800.
Yes, use the connector on the CPU card.
Settings are as follows:
Data Format is 8 bit standard ASCII
Parity is Off (Ignored)
Full Duplex
One Start Bit/One Stop Bit
|
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
Member
Joined: Oct 2002
Posts: 597 |
Ok that did it! All I need to do is make 2 ext's ring on all lines. Right now they appear and lamp on those 2 phones but you can only pick up a line off of hold or have it transfered.
|
|
|
|
|
Joined: Aug 2005
Posts: 6,692
Member
|
|
Member
Joined: Aug 2005
Posts: 6,692 |
Thanks for letting us know. Glad it worked for you. :thumb:
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
171
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
