|
|
Joined: Jul 2013
Posts: 81
Member
|
OP
Member
Joined: Jul 2013
Posts: 81 |
I have an AIPhone, GF-1MD. I attached wires to it's buzzer, to the TAR-3. - Black from TAR-3 to the buzzer and "-" on a 6V SKK-620B. - Blue from TAR-3 to the buzzer - Red from TAR-3 to the "+" on the 6V SKK-620B One Orange from the TAR-3 to a strobe, the other Orange to the "+" of a 12V 0E-4CPW5A60W. The "-" of the 12V 0E-4CPW5A60W to the other side of the strobe. Near as I can tell, that's how it should be...Drawing Name 551-GF-Ext Sig, Drawing Number 1002-551 AIPhone acts interested in helping me but, really just keeps sending me the same documentation.
If I wire either of the power supplies I have to the strobe (6v or 12v) the strobe lights. If I have everything wired like I wrote above, and short the connection to the phone from the TAR, light doesn't light. If I disconnect one of the wires to the phone, the light doesn't light.
Relay is in A position on the TAR. I have tried swapping what I have connected to the buzzer in the phone. -/+
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
138
guests, and
246
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|