|
|
|
|
Joined: Feb 2017
Posts: 8
Member
|
OP
Member
Joined: Feb 2017
Posts: 8 |
We have this issue where someone calls, it can be inbound or outbound, and the receiver just hears ringing. Sometimes it seems if you put the caller on hold and then pick it back up it will work, other times it wont. We have a ip900 with ESI 60 gigbit phones.
Has anyone seen this issue before?
We are kind of stumped.
|
|
|
|
|
Joined: Apr 2017
Posts: 3
Member
|
|
Member
Joined: Apr 2017
Posts: 3 |
Yes. If you have SIP trunks on the system it's a known issue according to ESI. The work around according to ESI is to move them from SIP trunks to a PRI or similar handoff. I ended up installing an ADTRAN to convert SIP to PRI handoff and ESI gave me a PRI card to put in the system.
If you're not on SIP trunks check to make sure you're on the latest software version.
|
|
|
|
|
Joined: Feb 2017
Posts: 8
Member
|
|
OP
Member
Joined: Feb 2017
Posts: 8 |
We are using ESI SIP trunks.
So ESI said it was a known issue with SIP trunks?
I think we are a little behind on firmware also.
|
|
|
|
Forums84
Topics93,879
Posts637,000
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
