|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
I can send the card and the providers config if anyone is willing to take a look at it.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2002
Posts: 1,088 Likes: 2
Member
|
|
Member
Joined: Aug 2002
Posts: 1,088 Likes: 2 |
Sure post it / send it. But what are they doing in the mean time?
Provider should be NI2 right?
|
|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
Jsaad I sent you an email with some info.
|
|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
As I stated earlier, I'm just trying to get by on this Mitel. What forms do I need to work on to make outbound calls use POTS lines. I'll keep the PRI for inbound.
|
|
|
|
|
Joined: Oct 2007
Posts: 330 Likes: 1
Member
|
|
Member
Joined: Oct 2007
Posts: 330 Likes: 1 |
If you have POTS lines in the system now, then just Form 16 to assign trunks to a trunk group. Apply the new trunks above the PRI trunks, then delete PRI trunks.
If you don't have any POTS lines in the PBX, then start in Form 13 to build the CDN then Form 14 to assign the trunks to the trunk card.
C5Z
Instructions are just one man's opinion on paper
|
|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
C5Z ,don't know if you saw this post from the beginning. It is a PRI problem, I'm at the end of trying to resolve where the problem originates. My solution is to keep inbound calls, all DID's are working on the PRI, the trunk card is still in the switch, pre PRI, so i want to have all outbound traffic go thru POTS, Inbound on the PRI.
|
|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
Now the digit issue has been resolved, the problem is outbound calls on the PRI have no audio. Inbound, no problem. What the heck is going on? Carrier or PBX problem?
Last edited by teleco; 12/01/20 09:23 AM.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
225
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
