|
|
|
|
Joined: Mar 2002
Posts: 8
Member
|
|
Member
Joined: Mar 2002
Posts: 8 |
Greetings.. Being a Toshiba guy by trade, I had a question on the Legend r6. Is the little LED on the front of the processor just an indicator? Or is it a trouble indicator. The green number display is off and no codes are being displayed so I would imagine it's normal??
Thanks.
Mikey
From the land of the Grapes!!
|
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
The red light comes on if you have a permanent Alarm inm the error log. An Alarm button can be programmed onto the console that turns on too if you have an alarm.
As for the Little display It is not for errors. I know it says
C for cold start
L while you upgrade the Processor Firmware
U while installing Module firmware
2 Incorrect memory card type
3 Memory card Inserted wrong or missing
4 Memory card corrupted
7 Dan Processor Board
9 Unknown Error try reloading or use another card
Don
|
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
7 should say BAD processor Module
|
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
Doesn't Dan mean Bad? ROFL ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/biggrin.gif)
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
you can clear the light from SPM if you have it. You can also use the console, but i don't have the overlay handy.
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
57
guests, and
184
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from i2.photobucket.com]](http://i2.photobucket.com/albums/y24/donbaker/Phone%20Stuff/baker_telecommunications_inc_small-.jpg)
