|
|
|
|
Joined: Dec 2004
Posts: 27
Member
|
|
Member
Joined: Dec 2004
Posts: 27 |
I have several Definity DS1 interface cards. I am needing to test these cards on a Definity switch. Can anybody help me on the Amphenol pinout to a loopback test jack, and will this work to at least loop back the card?
Will the card at least green light if I put it in a slot, or will the slot need to be programmed for the T1 card.
|
|
|
|
|
Joined: Apr 2002
Posts: 147
Member
|
|
Member
Joined: Apr 2002
Posts: 147 |
The pinouts are
22 of 1st board to 48 of second board
23 of 1st board to 47 of second board
47 of 1st board to 23 of second board
48 of 1st board to 22 of second board
yes the DS1 has to be configured. Command is add DS1 01AXX. Then add trunk-group 1.
add DS1 01AXX for second board. Then add trunk-group 2.
|
|
|
|
|
Joined: Dec 2004
Posts: 27
Member
|
|
Member
Joined: Dec 2004
Posts: 27 |
Thank You!!!!
You are a gentleman and a scholar.
|
|
|
|
Forums84
Topics94,552
Posts640,110
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
85
guests, and
149
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
