|
|
Joined: Dec 2009
Posts: 34
Member
|
OP
Member
Joined: Dec 2009
Posts: 34 |
In system status on IP Office 500v2 R6 one trunk show Out of service. Couldn't find any info on knowledge base how to restore, has anyone had this problem?
|
|
|
|
Joined: Oct 2003
Posts: 694
Member
|
Member
Joined: Oct 2003
Posts: 694 |
I think if you look at the line tab, and look at line type it will say out of service. Or maybe disabled. Just change that back to loop start or ground or whatever you need. It is in the docs that an unused trunk should be disabled. Is this a trunk that has been in service,or did you just notice it? Remember that this change will need a restart of the system.
Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
|
|
|
|
Joined: Dec 2009
Posts: 34
Member
|
OP
Member
Joined: Dec 2009
Posts: 34 |
Thanks But it's programmed as loop start. The led on button show green on M4424 phones, if I go in system status it show out of service.
|
|
|
|
Joined: Oct 2003
Posts: 694
Member
|
Member
Joined: Oct 2003
Posts: 694 |
Have you tested to make sure you have dial tone? Try unplugging the line at the KSU. Basics I know.
Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
|
|
|
|
Joined: May 2004
Posts: 1,665 Likes: 4
Moderator-Avaya
|
Moderator-Avaya
Joined: May 2004
Posts: 1,665 Likes: 4 |
WHat is the first trunk? T1/PRI? SIP?
|
|
|
|
Joined: Dec 2009
Posts: 34
Member
|
OP
Member
Joined: Dec 2009
Posts: 34 |
Yes line is working, moved to another CO port not problem. It is a copper line on 16 port module. There are no T1s just 24 copper lines
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (newtecky),
96
guests, and
331
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|