|
|
|
|
Joined: May 2011
Posts: 19
Member
|
|
Member
Joined: May 2011
Posts: 19 |
Thanks for all the advice!
Per a previous post, I had tried the expansion carrier without the 016 card. It is the metal cabinet and it is mounted on the right hand side of the main carrier. Also per previous post, I can't get a display on the console, so I can't perform a board renumbering.
I have ordered another expansion carrier to be shipped in. I'll let you know on Monday how that goes.
Thanks again!
Glenn
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
It sounds like a bad expansion carrier. It could possibly be a fault on the main cabinet, but likely it is the expansion cabinet. By the way, what version of Magix, what cards to you have in it now?
|
|
|
|
|
Joined: Dec 2005
Posts: 9,181 Likes: 9
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,181 Likes: 9 |
If you completely remove the expansion carrier, does the main carrier, modules & phones come up properly :confused:
I Love FEATURE 00
|
|
|
|
|
Joined: May 2011
Posts: 19
Member
|
|
Member
Joined: May 2011
Posts: 19 |
Thanks Guys! I'll check the versions in the morning when I get there to install the replacement carrier. I had actually considered that the main carrier could have a bad connector but have no clue how to check it other than replacing that carrier also. The main carrier run fine without the expansion Dex.  More to come... Glenn
|
|
|
|
|
Joined: May 2011
Posts: 19
Member
|
|
Member
Joined: May 2011
Posts: 19 |
New carrier and power supply resolved the issue! Thank each of you for taking the time to respond to this issue for me. Glenn
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Gary S., MooreTel),
178
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
