Trying to install Jabra Pro 920 headset with GN1000 auto lifter on Strat DK16 using DKT2020-SD and need to program so that phone auto answers ringing line. I currently have to select ringing line manually. How do I do this?
Thanks ---- That is what I thought but...
How do I find the logical port # of the phone being programed?
Am I disabling or enabling the ringing line preference
Is the Auto preference code:
No Selection
Intercom
Lowest Co line
line group
Int #402 will give you the port.
1 to enable ringing line preference.
The last 2 digits are for auto off hook selection.
Using an HHEU will eliminate the lifter.
Thanks....
Once I got the correct port I was able to program the phone
I'm still unsure as to which auto off hook selection to use
Normally, I'll set it up to off hook to intercom and not for CO lines. Especially if you have DSS buttons programmed on the phone.