|
|
Joined: Jun 2014
Posts: 3
Member
|
OP
Member
Joined: Jun 2014
Posts: 3 |
Trying to install Jabra Pro 920 headset with GN1000 auto lifter on Strat DK16 using DKT2020-SD and need to program so that phone auto answers ringing line. I currently have to select ringing line manually. How do I do this?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
|
|
|
|
Joined: Jun 2014
Posts: 3
Member
|
OP
Member
Joined: Jun 2014
Posts: 3 |
Thanks ---- That is what I thought but... How do I find the logical port # of the phone being programed? Am I disabling or enabling the ringing line preference Is the Auto preference code: No Selection Intercom Lowest Co line line group
|
|
|
|
Joined: Oct 2005
Posts: 610
Member
|
Member
Joined: Oct 2005
Posts: 610 |
Int #402 will give you the port. 1 to enable ringing line preference. The last 2 digits are for auto off hook selection. Using an HHEU will eliminate the lifter.
|
|
|
|
Joined: Jun 2014
Posts: 3
Member
|
OP
Member
Joined: Jun 2014
Posts: 3 |
Thanks.... Once I got the correct port I was able to program the phone I'm still unsure as to which auto off hook selection to use
|
|
|
|
Joined: Oct 2005
Posts: 610
Member
|
Member
Joined: Oct 2005
Posts: 610 |
Normally, I'll set it up to off hook to intercom and not for CO lines. Especially if you have DSS buttons programmed on the phone.
|
|
|
Forums84
Topics93,960
Posts637,381
Members49,702
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Curlycord),
63
guests, and
34
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|