Hi,

Is there a way on the DKT2010-SD to program a key, that will pick up a specific line and dial (*94 2) and possibly turn the indicator on that button?

The system (DK40) is using the telco voicemail, after office hours, I want to change the number of rings before the voicemail picks up. I can do that by picking the line and dialling *94 2 (2 is the minimum number of rings). Then in the morning, pick the line again and dial *94 5. I'm trying to do this with two keys. Going through program 39, I'm not sure what to use. If there is another way, I'm all ears.

Thanks,

Kevin

System or Station Speed-dial, although ther may be a trick involved to include the '*'. Don't think there's any way to light the LED.

Thank you! Can the speed dial pick up a specific CO line?

Yes, store intercom #700X *94 2 in the speed dial bin. Substitute X with the line #.

night mode can be toggled with 1 button, it lights up when in "night" mode on whatever set(s) the "night" button is programmed on... might be a bit more involved than you want to get into though.