I've got an ipk2 system that has a paging and doorphone adapter model # NEC pgd2-u10. Currently one of the rca output jacks feeds one amp that goes to some pa speakers. I need to enable the 2nd jack to do exactly the same thing as I have a new amp for a different part of the building.

I opened the case and saw 2 pr of jumpers. 1 pr had them connected up, the other pair didnt. Is this as simple as connecting the other jumper? Thanks -

Did You Make the Change in MB:10-03? And Connect it to a Digital Port?

It's all connected and the top rca jack works.

I didn't change 10-03. 10-03 channe1 1 is set, 10-03 channel 2 is not set. Is that the problem?

Thanks

The top RCA is the one that is paging currently using Right? Yes, You'll have to Set Channel 2 Just Like Channel 1.

Correct. I'll change channel 2 settings to match and give er a go -

Thanks again -

that didn't work, there are different options for channel 2. I'm going to go buy a $2 rca splitter and be done. Thanks though -