|
|
|
|
Joined: Apr 2009
Posts: 42
Member
|
OP
Member
Joined: Apr 2009
Posts: 42 |
I've got an ipk2 system that has a paging and doorphone adapter model # NEC pgd2-u10. Currently one of the rca output jacks feeds one amp that goes to some pa speakers. I need to enable the 2nd jack to do exactly the same thing as I have a new amp for a different part of the building.
I opened the case and saw 2 pr of jumpers. 1 pr had them connected up, the other pair didnt. Is this as simple as connecting the other jumper? Thanks -
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
Did You Make the Change in MB:10-03? And Connect it to a Digital Port?
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Apr 2009
Posts: 42
Member
|
|
OP
Member
Joined: Apr 2009
Posts: 42 |
It's all connected and the top rca jack works.
I didn't change 10-03. 10-03 channe1 1 is set, 10-03 channel 2 is not set. Is that the problem?
Thanks
|
|
|
|
|
Joined: Nov 2008
Posts: 953
Member
|
|
Member
Joined: Nov 2008
Posts: 953 |
The top RCA is the one that is paging currently using Right? Yes, You'll have to Set Channel 2 Just Like Channel 1.
"The Only Stupid Question, Is the Question Thats not Asked."
|
|
|
|
|
Joined: Apr 2009
Posts: 42
Member
|
|
OP
Member
Joined: Apr 2009
Posts: 42 |
Correct. I'll change channel 2 settings to match and give er a go -
Thanks again -
|
|
|
|
|
Joined: Apr 2009
Posts: 42
Member
|
|
OP
Member
Joined: Apr 2009
Posts: 42 |
that didn't work, there are different options for channel 2. I'm going to go buy a $2 rca splitter and be done. Thanks though -
|
|
|
|
Forums84
Topics93,881
Posts637,008
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
