not having a system available in my shop, I just want to know what do I dial to record the instruction and routing boxes prompts? My customer wants just a simple voice mail. (No answer,goes to VM, leave a message) I'm not sure that this system
will do anything so simple!!? Help is muchly appreciated.
pfonman
yes, I guess that would help to have what system, Sorry
the SL1100.
47-11 Change Default Mailbox Type to Station Mailbox if calls should go to personal mailbox instead of routing mailbox. Change Default Mailbox to correspond to mailbox you want to answer calls.
47-12-01 Change Answering Mailbox type to Station Mailbox if calls should go to personal mailbox instead of routing mailbox
You can DIL the trunks to operators extension, confirm there is a mailbox setup for that extension.
pfonman, below is what we send out for voicemail admin. It should help with what to dial.
CREATE AUTO ATTENDANT GREETINGS:
Press VMsg button in your display.
Press SA (72) for System Administration
Press the Inst key in your display
Choose the Greeting box number you wish to change:
001 – for day
002 – for night
003 – for alternate (Holiday)
Select Rec (Record) in the display. Once you have recorded your greeting press the DONE button in your display
Make that new Greeting active by listening to the prompts
TO ACTIVATE THE HOLIDAY GREETING:
Log into a mailbox with system admin rights
Dial 72 – System Administrator
Press 6 to set override mode
Enter the group (table) number – always will be 01
Press the ‘On’ softkey
Press the ‘MBOX’ softkey
Enter 003
Hangup
TO TURN OFF THE HOLIDAY GREETING:
Log into a mailbox with system admin rights
Dial 72 – System Administrator
Press 6 to set override mode
Enter the group (table) number – always will be 01
Press the ‘Off’ softkey
Hangup
TO DELETE A SECURITY CODE:
From an Admin phone dial into mailbox
Enter 72 for System Administrator functions
Dial 7 and enter the mailbox you need to change
Dial 7 to delete the security code
Hangup
TO SET UP YOUR MAILBOX FROM YOUR PHONE:
With the handset left down in the cradle, press the VMsg key in your display.
To record a greeting, press 4 or press the GREET button on your display. Select the greeting number (Typically Greeting 1) then select Rec (Record) in the display. Once you have recorded your greeting press the DONE button in your display followed by ##.
To record your name, press 76 then record your name. Once you have recorded your name press the DONE button in your display followed by ##.
To set a password, press 67 then 7. Enter your password. The voicemail will repeat the access code you entered for verification. Press the OK button and hang up.
* Setting a password is highly recommended to avoid unauthorized access and use.