atcomsystems.ca/forum
Dear All ,

I have a strange problem concerning on that there is a bank has 15 branches every branch has SV8100 all branches connected by Netlink Scenario and this since 3 years everything is OK and there are internal calls between branches and there is no call drop or site disconnect , but this problem appears before 3 days with 2 secondary system , those system can speech with all branches as well as with primary also but when there is a call between these systems there is no voice , I have checked the IP's and Netlink configuration there is no change , all sites connected to the primary through the VPN

ANY advise ???
Posted By: dans Re: SV8100 Netlink Scenario Configuration - 06/25/14 07:22 PM
Something had to change or was replaced at the secondary site, you need to dig deeper to find what did change.
Like What ??
Posted By: dans Re: SV8100 Netlink Scenario Configuration - 06/25/14 07:50 PM
Router replaced?
Router settings changed?
Posted By: Coral Tech Re: SV8100 Netlink Scenario Configuration - 06/25/14 08:05 PM
Look for media gateway IP contention. Look for duplicate IP address.
I noticed something the IP on command 10-12-09 i can ping it but The two IP in command 84-26 i can ping the first one only but the second i cant ping ... is this the issue ??
Posted By: Coral Tech Re: SV8100 Netlink Scenario Configuration - 06/25/14 11:46 PM
What size voip card?
Posted By: Coral Tech Re: SV8100 Netlink Scenario Configuration - 06/26/14 03:51 AM
But good chance that's it.
I remember all of them are 32 channels , but when make download or connected with every system by WebPro alone i found it 128 channels i don't know how is that happened ?
The problem is solved , it was in media gateway IP they were blocked on the firewall
© Sundance Business VOIP Telephone Help