atcomsystems.ca/forum
Posted By: ffej010 SL2100 voice announce - 10/01/19 11:18 PM
Is there a way to put a voice announce feature on a function key?
When one of the users wants to intercom/transfer, the destination phone rings. Sometimes, they simply want to page (voice announce) a particular set.
What they would like to do is have a separate function key that they could press and then either press a DSS key or dial the extension number to announce to another set.

Is this possible? I'm racking my brain on how to make this work.
They don't like how currently they intercom, it starts ringing the destination extension, and then they press Voice to access voice announce.

Jeff
Posted By: nortelvoip Re: SL2100 voice announce - 10/02/19 02:38 AM
You can't put it in a button but you can change the default on each extension to either Ring or VA as soon as the extension is dialed. I have a site with an SL1100 that the office sets all ring when called but the phones in the floor of the retail space all default to VA when called.
Posted By: dans Re: SL2100 voice announce - 10/02/19 12:39 PM
When you call an extension and its set to ring press 1 on the key pad and it will switch to voice announce.

If you call any extension that is set for voice announce by pressing 1 after calling the extension will force it to ring.

This applies to the SL1100, SL2100, SV8100 and SV9100
Posted By: helpifican Re: SL2100 voice announce - 10/02/19 01:16 PM
Call an extension, then press the Voice or Ring softkey.
Posted By: dans Re: SL2100 voice announce - 10/02/19 02:25 PM
Good catch and point helpifican.
Posted By: ffej010 Re: SL2100 voice announce - 10/08/19 12:09 AM
Thanks for the tips.
Customer would just like a key that rings the extension and a key that voice announces the extension.
I'll inform them of the options mentioned above and we'll go from there.
Posted By: nortelvoip Re: SL2100 voice announce - 10/08/19 12:25 AM
Unfortunately, you can't do that with this system. I'm guessing they came from a Nortel environment where it's always ring or press voice call first and then dial ext. In the NEC systems each extension has a default of either Ring or voice announce and then when another extension calls that extension they can press 1 or the soft key to switch from whatever that default is.
Posted By: Coral Tech Re: SL2100 voice announce - 10/08/19 11:06 AM
Try making one key the ext number (101) and the other key you want to do the opposite (P1001).
Posted By: Coral Tech Re: SL2100 voice announce - 10/09/19 06:19 PM
Originally Posted by Coral Tech
Try making one key the ext number (101) and the other key you want to do the opposite (P1001).

Try making one key the ext number (101) and the other key you want to do the opposite (P1011).

Sorry mis-typed it.
© Sundance Business VOIP Telephone Help